Definitions
The following are the most commonly used terms that new students may find confusing.
Students
間眅埶AV does not classify students as either full time or part time although there are varying course load requirements for many types of financial aid.
Continuing Students
Students who enrolled for one or more of the last three terms and who are eligible to continue will be advised of enrolment procedures and deadlines well in advance of each term.
Former Students
Under certain conditions, former students submit formal application for readmission in order to continue academic studies at the University (see Reactivation and Readmission).
New Students
After the application for admission has been assessed, the applicant will be advised of admission. If admitted, the student receives instruction on the procedure to enrol in courses.
Qualifying Student
Applies to students enrolling in graduate studies. See Graduate General Regulations: 間眅埶AV as a Qualifying Student.
Regular Student
A regular student is one proceeding to a degree, diploma or certificate in any faculty. A regular student may already hold one or more bachelors degrees.
Special Audit Student
Students who are not admissible to 間眅埶AV under the general admission regulations but who wish to audit 間眅埶AV credit courses may be given entry as Special Audit Students. Special application procedures apply; see .
Special Student
A student already holding a first degree may, as a special student, enrol in undergraduate courses only. Credit for these courses may not be applied toward completion of any certificate, diploma, undergraduate or graduate credential at 間眅埶AV.
Visiting and Exchange Students
A visiting student is a bona fide student of another accredited institution who is permitted to complete credit courses only toward a degree, certificate or diploma at the home institution. Applicants who wish to become visiting students must meet all admission requirements and must submit a letter of permission from the home institutions registrar. A visiting student wishing to become a regular 間眅埶AV student must reapply and meet admission requirements in effect at that time.
Academic Year
Term
The calendar year is divided into three academic terms (formerly called semesters) of 16 weeks each. Each term has its own enrolment and final examinations. All academic courses are one term long, or a shorter session such as intersession or summer session. Students may enter at the beginning of any term and attend one, two or three terms in a year. By attending continuously, a student who entered from BC high school grade 12 (or equivalent) in the fall 2009 term could graduate with a bachelors degree at the end of the spring 2012 term. The following illustrates an academic year.
Fall Term | 釦梗梯喧梗鳥莉梗娶&紳莉莽梯;&紳莉莽梯;嗨梗釵梗鳥莉梗娶 |
Spring Term | 斑硃紳喝硃娶聆&紳莉莽梯;&紳莉莽梯;插梯娶勳梭 |
Summer Term |
紼硃聆&紳莉莽梯;&紳莉莽梯;插喝眶喝莽喧 |
Intersession Term |
紼硃聆&紳莉莽梯;&紳莉莽梯;斑喝紳梗 |
Summer Session |
斑喝梭聆&紳莉莽梯;&紳莉莽梯;插喝眶喝莽喧 |
To increase the accessibility of the summer program (May-August) to teachers and others, the summer term is enriched by two, two-month sessions called intersession (May-June) and summer session (July-August). These programs are offered in addition to the regular four month summer term.
Term Codes
The Universitys student information system uses numeric codes for terms. Students will often encounter these codes when using , the on-line student services portal. Here are the term codes for the upcoming year:
1151 | Spring 2015 |
1154 | Summer 2015 |
1157 | Fall 2015 |
1161 | Spring 2016 |
The codes can be interpreted as follows:
- 1 represents the 21st century
- 13 = year (e.g. 2013)
- the final digit is the term: 1 for spring, 4 for summer and 7 for fall.
Levels
Undergraduates in Canada are traditionally classified as first year (freshman), second year (sophomore), third year (junior), or fourth year (senior) students. Since year does not apply to the trimester system, the students progression is expressed in levels. Level refers to the status of a students program. Each level normally equals one terms work with a full course load; a typical four year bachelors degree program consists of eight levels. The first four (i.e., the first 60 units) are lower divisions. Levels 5 and above are upper divisions. The term level is not used for graduate programs. Usually students in levels 1 and 2 complete 100 series courses; those in levels 3 and 4 complete 200 series courses; those beyond level 4 complete 300 and 400 series courses.
Four Year General Degree Program |
|||
|
Level |
Units |
Traditional Terms |
Lower Levels |
1 |
0-15 |
first year or freshman |
2 |
15-29 |
||
3 |
30-44 |
second year or sophomore |
|
4 |
45-59 |
||
Upper Levels |
5 |
60-74 |
third year or junior |
6 |
74-89 |
||
7 |
90-104 |
fourth year or senior |
|
8 |
>104 |
||
Total 120 units |
Four Year Honours Degree Program |
|||
|
Level |
Units |
Traditional Terms |
Lower Levels |
1 |
0-15 |
first year or freshman |
2 |
15-29 |
||
3 |
30-44 |
second year or sophomore |
|
4 |
45-59 |
||
Upper Levels |
5 |
60-77 |
third year or junior |
6 |
78-95 |
||
7 |
96-113 |
fourth year or senior |
|
8 |
>113 |
||
Total 132 units |
Courses
Subject
A subject (or discipline) is a body of knowledge with arbitrary boundary lines, e.g. philosophy, chemistry or psychology. For convenience, professors of a subject are usually grouped together in a department.
Prerequisite
A prerequisite, also called a requisite, is a requirement needed to enrol in a course.
Corequisite
A corequisite is a course to be completed at the same time as another course.
Division
Division relates to undergraduate courses: those numbered 001 to 299 inclusive are lower division courses; those numbered 300 to 499 are upper division courses. Graduate courses are numbered in the 500 to 999 series. In certain instances, upper division courses may be completed in the lower levels and lower division courses in the upper levels. Refer to specific regulations pertaining to requirements for degrees, certificates or diplomas.
Course Numbering
Each subject is divided into courses usually offered in term length units. Each course is identified by a subject name followed by a course number, the number of units, and course title, e.g. ENGL 103-3 Introduction to Drama. The first course number digit represents the division of the course; the fourth digit indicates the units. For example, ENGL 103-3 is a first division course offering three units.
Lectures, Tutorials and Laboratories
Although there are variations among departments, instruction in lower division courses combines a large lecture section with small tutorial groups. The large lecture enables as many students as possible to hear the very best teachers. The small tutorial groups provide more personal instruction and an opportunity for discussion of readings and lecture material. A typical course consists of two lectures and one tutorial a week. Notable exceptions are the sciences and languages, where a laboratory may be involved.
Credit Courses
These courses carry units and count toward the total required for a degree, certificate or diploma, subject to the regulations governing the credential
Credit Hours
See Units below.
Units
Units, formerly known as credits, are assigned to each course; most have three units. A normal course load for full attendance in a term is 15 units. Requirements for credentials (e.g., degrees, diplomas and certificates) are partially expressed as units.
The unit weight is shown for each course as follows.
subject: Mathematics (MATH)
course number: 232
units: 3
Credit-Free Courses
These courses carry no credit and do not count toward a degree, certificate or diploma. At times, they are termed non-credit courses.
Additive Credit
In courses deemed to have additive credit, the units do not count towards the total units required for a degree. Co-operative Education practicum courses typically have additive credit.D
Distance Education Courses
Many courses are available as distance education courses. The majority of these are print-based. Some may also have audio and/or video support. Increasingly, educational technologies (e.g. computer conferencing) are being incorporated as courses are developed and revised. The program parallels the campus term system of the University, with the same 16 week period for course completion. For more information, see
Obligation to Declare Majors, Minors or Other Areas of Specialization
Students are expected to obtain formal approval to enter an area of specialization by the time they have earned 60 units. Specialization is a term used to cover programs such as majors, minors, double majors, honours, extended minors, etc. Department refers to the faculty, department, school or unit responsible for a program. There are some other programs (e.g., post baccalaureate diplomas, certificates) which may have additional instruction regarding procedure since the students in these programs fall outside the usual flow of units.
Undeclared
This category will be used for any student who, prior to the successful completion of the 61st unit, has not recorded an intended specialization. Academic advising for undeclared students is available from Academic Advising and Student Success.
Approved
This category identifies the specialization of a student who is formally approved by the department or signing authority for that specialization and may be granted at the departments discretion or signing authority. This must be done by the 61st unit. Advising for approved students is the responsibility of the department offering the approved specialization(s).
Course Loads
The following maximum course loads apply to all students, but certain students may be granted permission by their respective faculties to enrol in course overloads (see below).
Regular Session
The maximum course load for all students who are not enrolled for summer session courses only, or intersession courses only and who are not entering their graduating term is as follows:
Applied Sciences |
18 units |
Arts and Social Sciences | 18 units |
Business Administration | 18 units |
Communication, Art and Technology |
18 units |
Education |
18 units (PDP and PLP students have a maximum load of 20 units) |
Engineering Science |
22 units (permission of the director is required for course loads below 15 units). |
Environment |
18 units |
Health Science |
18 units |
Science | 18 units |
Intersession or Summer Session Only
Students enrolling for the intersession or summer session only may not enrol in programs having a total value in excess of nine units, except where course combinations may require enrolment in a program of 10 units; however, no student will be permitted to undertake a program of more than 10 units of work.
Summer Term, Intersession, Summer Session Combinations
Normal course load limits apply to students who enrol in combinations of the above. For course load values only, in the regular summer term the course load value corresponds to the courses units. In the intersession or summer session, the course load value is twice the units because, in the shorter session, classes must meet twice as often or for longer periods to equal the regular term. Therefore, when calculating course load value, note the following example. This does not apply to the regulations for assessment of financial aid and awards.
Course |
Units |
|
Course Load Credit |
ARCH 371-5 |
5 |
equals |
5 |
ARCH 372-5 |
5 |
equals |
10 |
Total Course Load |
10 |
equals |
15 |